Tired of pinning down hems and moving the pins along as you go? Are you fed up with folding and ironing the hems first before sewing so you can get that clean professional look?
OurEasy Hemming Sewing Foot willmake sewinga million times easier!This revolutionary tool will make your sewing experiencestress-free and hassle-free. With its addedunique spiral design, it firmly holds hems while you sew.
Made ofdurable hard metal materialfor a long time use
Widely used inclothes and other projects with lightweight fabric
Fits most sewing machinessuch asBrother, Singer, New Home, Janome, Toyotaand all otherdomestic sewing machines with a low shank system
Easy to install and easy to use
Addsdelicate and beautiful rolled hemsto your projects
Whether you’re a novice or an expert with sewing machines, theEasy Hemming Sewing Footis definitelya must-have for any sewing kit.Say goodbye pins and sewing chalks from now on!
HOW TO USE:
Select desired wide rolled hem attachment size and attach to the Sewing Foot.
Trim about 1.0 cm (3/8”) from the corner of the cloth to make it easy to insert through the cloth entrance.(See Figure 1)
Fold fabric edge approximately 0.60 cm (1/4”) and iron.(See Figure 2)
Fold fabric again and insert into the cloth entrance.(See Figure 3)
Loosen the adjustment screw an adjust position of the sliding so the machine seams hem with a 0.30 cm allowance from the first fold.
Lower the needle into the fabric at the point where sewing is to begin. Then lower the Sewing Foot.
If necessary, pin the folded cloth approximately every 9 cm (3”) and remove pins while sewing.
Slowly begin to sew while feeling cloth smoothly.(See Figure 4)